Andy Shaw Andy Shaw
0 Course Enrolled • 0 Course CompletedBiography
JN0-683퍼펙트덤프데모다운로드덤프데모다운로드
PassTIP을 선택함으로 100%인증시험을 패스하실 수 있습니다. 우리는Juniper JN0-683시험의 갱신에 따라 최신의 덤프를 제공할 것입니다. PassTIP에서는 무료로 24시간 온라인상담이 있으며, PassTIP의 덤프로Juniper JN0-683시험을 패스하지 못한다면 우리는 덤프전액환불을 약속 드립니다.
Juniper JN0-683 시험요강:
주제
소개
주제 1
- Data Center Interconnect: For Data Center Engineers, this part focuses on interconnecting data centers, covering Layer 2 and Layer 3 stretching, stitching fabrics together, and using EVPN-signaled VXLAN for seamless communication between data centers.
주제 2
- Data Center Deployment and Management: This section assesses the expertise of data center networking professionals like architects and engineers, focusing on key deployment concepts. Topics include Zero-touch provisioning (ZTP), which automates device setup in data centers without manual input.
주제 3
- Data Center Multitenancy and Security: This section tests knowledge of single-tenant and multitenant data center setups. Candidates such as Data Center Professionals are evaluated on ensuring tenant traffic isolation at both Layer 2 and Layer 3 levels in shared infrastructure environments.
주제 4
- EVPN-VXLAN Signaling: This section assesses an understanding of Ethernet VPN (EVPN) concepts, including route types, multicast handling, and Multiprotocol BGP (MBGP). It also covers EVPN architectures like CRB and ERB, MAC learning, and symmetric routing.
JN0-683시험대비 덤프 최신 샘플문제, JN0-683퍼펙트 덤프데모문제
Juniper인증JN0-683시험은 현재 치열한 IT경쟁 속에서 열기는 더욱더 뜨겁습니다. 응시자들도 더욱더 많습니다. 하지만 난이도난 전혀 낮아지지 않고 이지도 어려운 시험입니다. 어쨌든 개인적인 지식 장악도 나 정보기술 등을 테스트하는 시험입니다. 보통은Juniper인증JN0-683시험을 넘기 위해서는 많은 시간과 신경이 필요합니다.
최신 JNCIP-DC JN0-683 무료샘플문제 (Q48-Q53):
질문 # 48
You want to convert an MX Series router from a VXLAN Layer 2 gateway to a VXLAN Layer 3 gateway for VNI 100. You have already configured an IRB interface. In this scenario, which command would you use to accomplish this task?
- A. set protocols isis interface irb.100 passive
- B. set vlans VLAN-100 13-interface irb.100
- C. set protocols ospf area 0.0.0.0 interface irb.100 passive
- D. set bridge-domains VLAN-100 routing-interface irb.100
정답:D
질문 # 49
Exhibit.
Referring to the exhibit, which statement is correct?
- A. The MAC address is unknown and not in the forwarding table of the remote VTEP.
- B. The MAC address is known but not reachable by the remote VTEP
- C. The remote VTEP is not responding.
- D. VNI 100 is not configured on the remote VTEP.
정답:A
설명:
* Analyzing the Exhibit Output:
* The command ping overlay tunnel-type vxlan is used to test the VXLAN tunnel between two VTEPs (VXLAN Tunnel Endpoints). The output shows a warning about missing hash parameters, but more importantly, it displays the result: End-System Not Present.
* Understanding the Response:
* The message End-System Not Present indicates that the remote VTEP (192.168.2.20) did not find the MAC address 00:00:5E:00:53:CC in its forwarding table. This typically means that the MAC address is unknown to the remote VTEP, and as a result, it could not forward the packet to the intended destination.
Conclusion:
* Option B:Correct-The MAC address is unknown and is not in the forwarding table of the remote VTEP, which is why the system reports that the "End-System" is not present.
질문 # 50
Whatare two ways in which an EVPN-signaled VXLAN is different from a multicast-signaled VXLAN?
(Choose two.)
- A. An EVPN-signaled VXLAN features slower and more complete convergence.
- B. An EVPN-signaled VXLAN can perform autodiscovery of VTEPs using IS-IS.
- C. An EVPN-signaled VXLAN is less resource intensive.
- D. An EVPN-signaled VXLAN can perform autodiscovery of VTEPs using BGP.
정답:C,D
설명:
* Multicast-Signaled VXLAN:
* In traditional multicast-signaled VXLAN, VTEPs (VXLAN Tunnel Endpoints) use multicast to flood and learn about remote VTEPs. This method relies on multicast in the underlay network to distribute BUM (Broadcast, Unknown unicast, and Multicast) traffic.
* This approach can be resource-intensive due to the need for multicast group management and increased network traffic, especially in large deployments.
* EVPN-Signaled VXLAN:
* EVPN-signaled VXLAN uses BGP (Border Gateway Protocol) to signal the presence of VTEPs and distribute MAC address information. BGP is used for VTEP autodiscovery and the distribution of endpoint information.
* This method is more efficient because it reduces the reliance on multicast, instead using BGP control-plane signaling to handle VTEP discovery and MAC learning, which reduces the overhead on the network and improves scalability.
* Correct Statements:
* B. An EVPN-signaled VXLAN can perform autodiscovery of VTEPs using BGP:This is correct because EVPN uses BGP for VTEP autodiscovery, making it more efficient and scalable compared to multicast-based methods.
* C. An EVPN-signaled VXLAN is less resource-intensive:This is correct because it eliminates the need for multicast flooding in the underlay, instead using BGP for signaling, which is less demanding on network resources.
* Incorrect Statements:
* A. An EVPN-signaled VXLAN can perform autodiscovery of VTEPs using IS-IS:This is incorrect because EVPN relies on BGP, not IS-IS, for VTEP discovery and signaling.
* D. An EVPN-signaled VXLAN features slower and more complete convergence:This is incorrect; EVPN with BGP typically provides faster convergence due to its use of a control plane rather than relying on data plane learning.
Data Center References:
* EVPN-VXLAN is widely adopted in modern data center designs due to its scalability, efficiency, and reduced resource consumption compared to multicast-based VXLAN solutions. It leverages the strengths of BGP for control-plane-driven operations, resulting in more efficient and scalable networks.
질문 # 51
Which two statements are correct about an IP fabric? (Choose two.)
- A. Only a single point to point EBGP session is required between peers in an IP fabric.
- B. FBGP is only required to route mostrouting information to external devices outside the fabric.
- C. All leaf devices can use the same AS number in an IP fabric without making any adjustments to the EBGP configuration
- D. The multipath multiple-as statement is required to enable ECMP if every device has a different AS number.
정답:C,D
설명:
* BGP in IP Fabric:
* In an IP fabric, Border Gateway Protocol (BGP) is used to manage the routing between leaf and spine devices. Each device can have the same or different Autonomous System (AS) numbers depending on the network design.
* Multipath Multiple-AS:
* Option B:If every device in the fabric has a different AS number, then enabling Equal-Cost Multi-Path (ECMP) routing requires the multipath multiple-as statement. This configuration allows BGP to consider multiple paths across different AS numbers as equal cost, enabling efficient load balancing across the network.
* Same AS Number Configuration:
* Option A:It's possible for all leaf devices to use the same AS number in an IP fabric, which simplifies the configuration. EBGP (External BGP) will still function correctly in this setup because BGP considers the peering relationship rather than strictly enforcing different AS numbers in this specific use case.
Conclusion:
* Option B:Correct-This statement is essential for enabling ECMP in a multi-AS environment.
* Option A:Correct-Leaf devices can share the same AS number without needing special EBGP configuration.
질문 # 52
You are deploying an IP fabric using EBGP and notice that your leaf devices are advertising and receiving all the routes. However, the routes are not installed in the routing table and are marked as hidden.
Which two statements describe how to solve the issue? (Choose two.)
- A. You need to configure as-override.
- B. You need to configure loops 2.
- C. You need to configure multipath multiple-as.
- D. You need to configure a next-hop self policy.
정답:B,C
질문 # 53
......
많은 사이트에서도 무료Juniper JN0-683덤프데모를 제공합니다. 우리도 마찬가지입니다. 여러분은 그러한Juniper JN0-683데모들을 보시고 다시 우리의 덤프와 비교하시면, 우리의 덤프는 다른 사이트덤프와 차원이 다른 덤프임을 아사될 것 입니다. 우리 PassTIP사이트에서 제공되는Juniper인증JN0-683시험덤프의 일부분인 데모 즉 문제와 답을 다운받으셔서 체험해보면 우리PassTIP에 믿음이 갈 것입니다. 왜냐면 우리 PassTIP에는 베터랑의 전문가들로 이루어진 연구팀이 잇습니다, 그들은 it지식과 풍부한 경험으로 여러 가지 여러분이Juniper인증JN0-683시험을 패스할 수 있을 자료 등을 만들었습니다 여러분이Juniper인증JN0-683시험에 많은 도움이Juniper JN0-683될 것입니다. PassTIP 가 제공하는JN0-683테스트버전과 문제집은 모두Juniper JN0-683인증시험에 대하여 충분한 연구 끝에 만든 것이기에 무조건 한번에Juniper JN0-683시험을 패스하실 수 있습니다. 때문에Juniper JN0-683덤프의 인기는 당연히 짱 입니다.
JN0-683시험대비 덤프 최신 샘플문제: https://www.passtip.net/JN0-683-pass-exam.html
- JN0-683시험패스 가능한 공부문제 🖌 JN0-683적중율 높은 인증덤프자료 🧒 JN0-683덤프공부문제 ♿ ▷ www.exampassdump.com ◁에서▶ JN0-683 ◀를 검색하고 무료로 다운로드하세요JN0-683퍼펙트 최신 덤프공부자료
- 시험패스에 유효한 JN0-683퍼펙트 덤프데모 다운로드 덤프데모 다운 🙃 오픈 웹 사이트「 www.itdumpskr.com 」검색⇛ JN0-683 ⇚무료 다운로드JN0-683학습자료
- 시험패스에 유효한 JN0-683퍼펙트 덤프데모 다운로드 덤프데모 다운 🦋 ➽ www.koreadumps.com 🢪에서《 JN0-683 》를 검색하고 무료 다운로드 받기JN0-683시험내용
- 시험패스 가능한 JN0-683퍼펙트 덤프데모 다운로드 최신버전 공부자료 💛 ( www.itdumpskr.com )을(를) 열고➤ JN0-683 ⮘를 입력하고 무료 다운로드를 받으십시오JN0-683인기시험
- 시험준비에 가장 좋은 JN0-683퍼펙트 덤프데모 다운로드 최신 덤프공부 🚉 ▶ JN0-683 ◀를 무료로 다운로드하려면▛ www.dumptop.com ▟웹사이트를 입력하세요JN0-683시험패스 가능한 공부문제
- JN0-683인기덤프공부 ⬆ JN0-683인기시험 🎢 JN0-683적중율 높은 시험대비덤프 🎡 무료로 다운로드하려면✔ www.itdumpskr.com ️✔️로 이동하여▛ JN0-683 ▟를 검색하십시오JN0-683높은 통과율 인기 시험자료
- 시험패스 가능한 JN0-683퍼펙트 덤프데모 다운로드 최신버전 공부자료 👞 《 www.koreadumps.com 》의 무료 다운로드☀ JN0-683 ️☀️페이지가 지금 열립니다JN0-683높은 통과율 인기 시험자료
- 퍼펙트한 JN0-683퍼펙트 덤프데모 다운로드 덤프데모문제 보기 🐐 지금{ www.itdumpskr.com }을(를) 열고 무료 다운로드를 위해《 JN0-683 》를 검색하십시오JN0-683인증덤프공부문제
- JN0-683인증덤프공부문제 🕔 JN0-683덤프공부문제 🌜 JN0-683학습자료 🕖 지금➥ www.exampassdump.com 🡄에서「 JN0-683 」를 검색하고 무료로 다운로드하세요JN0-683최신 기출문제
- 시험대비 JN0-683퍼펙트 덤프데모 다운로드 덤프샘플 다운로드 ⭐ 오픈 웹 사이트“ www.itdumpskr.com ”검색“ JN0-683 ”무료 다운로드JN0-683합격보장 가능 덤프
- JN0-683덤프공부문제 🛰 JN0-683합격보장 가능 덤프 🛳 JN0-683인기덤프공부 🕔 { www.koreadumps.com }의 무료 다운로드【 JN0-683 】페이지가 지금 열립니다JN0-683최신 기출문제
- finnova.in, study.stcs.edu.np, abdanielscareacademy.com.ng, uniway.edu.lk, ncon.edu.sa, jurfemosvita.com, zerothware.com, egyaan.in, ncon.edu.sa, taonguyenai.com